B+B SmartWorx BB-850-18123

Mounting Type

Surface Mount

Package / Case

4-SMD, No Lead

Package

Bulk

Mfr

Suntsu Electronics, Inc.

Product Status

Active

Operating Temperature

The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

-30°C ~ 85°C

Series

SXT214

Packaging

Semiconductor package is a carrier / shell used to contain and cover one or more semiconductor components or integrated circuits. The material of the shell can be metal, plastic, glass or ceramic.

Bulk

Size / Dimension

0.079 L x 0.063 W (2.00mm x 1.60mm)

Part Status

Parts can have many statuses as they progress through the configuration, analysis, review, and approval stages.

Active

Connector Type

RJ48, SC

Type

MHz Crystal

Ingress Protection

Ingress Protection rating (or just IP rating), is an international standard (IEC 60529) used to rate the degree of protection or sealing effectiveness in electrical enclosures against intrusion of objects, water, dust or accidental contact. It corresponds to the European standard EN 60529.

--

Frequency

32 MHz

Frequency Stability

the variation of output frequency of a crystal oscillator due to external conditions like temperature variation, voltage variation, output load variation, and frequency aging.

±50ppm

ESR (Equivalent Series Resistance)

100 Ohms

Configuration

Modular - Card

Load Capacitance

the amount of capacitance measured or computed across the crystal terminals on the PCB. Frequency Tolerance. Frequency tolerance refers to the allowable deviation from nominal, in parts per million (PPM), at a specific temperature, usually +25°C.

17pF

Operating Mode

A phase of operation during the operation and maintenance stages of the life cycle of a facility.

Fundamental

Frequency Tolerance

the maximum allowable deviation from the nominal crystal frequency at a specified temperature, usually 25℃. The recommended frequency tolerance of the crystal over the manufacturing process is ±50 ppm.

±50ppm

Fiber Type

100BASE-FX (Singlemode)

Copper Type

T1/E1/J1

Copper Ports

1

Fiber Ports

1

Distance

20km

MTU

--

Features

SNMP Manageable

SFP/XFP Ports

--

Height Seated (Max)

0.020 (0.50mm)