Banner Engineering QS18VP6CV45

Housing Material

ABS

Package

Bulk

Mfr

Banner Engineering Corporation

Product Status

Active

Maximum Operating Temperature

the maximum body temperature at which the thermistor is designed to operate for extended periods of time with acceptable stability of its electrical characteristics.

+70°C

Minimum Operating Temperature

-20°C

Operating Temperature

The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

-20°C ~ 70°C

Series

QS18

Voltage - Supply

10V ~ 30V

Output Type

PNP

Operating Supply Voltage

The voltage level by which an electrical system is designated and to which certain operating characteristics of the system are related.

10 VDC to 30 VDC

Output Configuration

PNP - Dark-ON/Light-ON

Cable Length

A nautical unit of measure equal to one tenth of a nautical mile or approximately 1 fathoms.

5.906 (150.00mm)

Response Time

the time taken for a circuit or measuring device, when subjected to a change in input signal, to change its state by a specified fraction of its total response to that change.

600µs

Amplifier Type

Photoelectric

Adjustment Type

Adjustable, Potentiometer

Sensing Distance

It is the sensing range for which the sensor can stably detect the standard sensing object even if there is an ambient temperature drift and/or supply voltage fluctuation. (Normally, it is 70 to 80 % of the maximum operation distance.)

-

Sensing Method

Convergent

Connection Method

the systematic way of connecting the Power Plant (units) to the power grid.

Connector, M12

Light Source

an optical transmitter that is paired with an optical receiver, both of which are connected to electrically based devices or systems.

Red (630nm)

Electrical Connection

Cable

IP Rating

IP (or "Ingress Protection") ratings are defined in international standard EN 6529 (British BS EN 6529:1992, European IEC 659:1989). They are?used to define levels of sealing effectiveness of electrical enclosures against intrusion from foreign bodies?(tools, dirt etc) and moisture.

IP67