Asco D1A05D

Mounting Type

Surface Mount

Package / Case

4-SMD, No Lead

Mount

Through Hole

Number of Terminals

8

Package

Bulk

Mfr

Suntsu Electronics, Inc.

Product Status

Active

CoilResistance

500 Ω

RoHS

Non-Compliant

Operating Temperature

The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

-40°C ~ 85°C

Series

SXT214

Size / Dimension

0.079 L x 0.063 W (2.00mm x 1.60mm)

Termination

PC Pin

Type

MHz Crystal

Max Operating Temperature

The Maximum Operating Temperature is the maximum body temperature at which the thermistor is designed to operate for extended periods of time with acceptable stability of its electrical characteristics.

85 °C

Min Operating Temperature

-40 °C

Frequency

22.1184 MHz

Frequency Stability

the variation of output frequency of a crystal oscillator due to external conditions like temperature variation, voltage variation, output load variation, and frequency aging.

±25ppm

ESR (Equivalent Series Resistance)

120 Ohms

Contact Resistance

100 mΩ

Insulation Resistance

The measurement of insulation resistance is carried out by means of a megohmmeter – high resistance range ohmmeter. A general rule-of-thumb is 10 Megohm or more.

100 GΩ

Load Capacitance

the amount of capacitance measured or computed across the crystal terminals on the PCB. Frequency Tolerance. Frequency tolerance refers to the allowable deviation from nominal, in parts per million (PPM), at a specific temperature, usually +25°C.

11pF

Operating Mode

A phase of operation during the operation and maintenance stages of the life cycle of a facility.

Fundamental

Throw Configuration

SPST

Frequency Tolerance

the maximum allowable deviation from the nominal crystal frequency at a specified temperature, usually 25℃. The recommended frequency tolerance of the crystal over the manufacturing process is ±50 ppm.

±25ppm

Operate Time

The time interval between the instant of the occurrence of a specified input condition to a system and the instant of completion of a specified operation.

500 µs

Coil Current

A current coil is basically a coil, such as, a wire wrapped around an electrical conductor.

10 mA

Release Time

In telecommunication, release time is the time interval for a circuit to respond when an enabling signal is discontinued

200 µs

Coil Voltage (DC)

5 V

Height Seated (Max)

0.020 (0.50mm)

Ratings

-