Arcol VRH320 10K K

Part No:

VRH320 10K K

Manufacturer:

Arcol

Datasheet:

Package:

4-SMD, No Lead

AINNX NO:

35790567-VRH320 10K K

Category:

Specialized Resistors

Description:

Arcol 10kΩ Wirewound Rheostat 3.1A, VRH320 10K K

Products specifications

Mounting Type
Surface Mount
Package / Case
4-SMD, No Lead
Package
Bulk
Mfr
Suntsu Electronics, Inc.
Product Status
Active
Dimensions
446 x 93 x 150mm
Maximum Voltage Rating
600 V
Operating Temperature
The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.
-30°C ~ 85°C
Series
SXT224
Size / Dimension
0.098 L x 0.079 W (2.50mm x 2.00mm)
Tolerance
±10%
Type
MHz Crystal
Power Rating
320VA
Depth
93mm
Current Rating
Current rating is the maximum current that a fuse will carry for an indefinite period without too much deterioration of the fuse element.
3.1A
Frequency
16.384 MHz
Frequency Stability
the variation of output frequency of a crystal oscillator due to external conditions like temperature variation, voltage variation, output load variation, and frequency aging.
±30ppm
Termination Style
Solder Lug
Actuator Type
Slide
ESR (Equivalent Series Resistance)
100 Ohms
Load Capacitance
the amount of capacitance measured or computed across the crystal terminals on the PCB. Frequency Tolerance. Frequency tolerance refers to the allowable deviation from nominal, in parts per million (PPM), at a specific temperature, usually +25°C.
17pF
Operating Mode
A phase of operation during the operation and maintenance stages of the life cycle of a facility.
Fundamental
Frequency Tolerance
the maximum allowable deviation from the nominal crystal frequency at a specified temperature, usually 25℃. The recommended frequency tolerance of the crystal over the manufacturing process is ±50 ppm.
±30ppm
Resistance Tolerance
Tolerance is the percentage of error in the resistor's resistance, or how much more or less you can expect a resistor's actual measured resistance to be from its stated resistance. A gold tolerance band is 5% tolerance, silver is 10%, and no band at all would mean a 20% tolerance.
± 10%
Product Length
446mm
Product Width
93mm
Height Seated (Max)
0.026 (0.65mm)
Height
150mm
Length
446mm
Product Height
-
Ratings
-

0 Similar Products Remaining