All Products
Applied Motion MMI-02
Part No:
MMI-02
Manufacturer:
Datasheet:
Package:
-
AINNX NO:
50385910-MMI-02
Category:
Description:
The MMI-02 is an easy-to-use operator interface accessory for Si Programmer™. The MMI-02 connects directly to an i or Si drive’s serial programming port and makes user access of internal Si program parameters a snap. The MMI-02 is also available in a non-backlit version, the
Products specifications
- Factory Pack QuantityFactory Pack Quantity1
- ManufacturerApplied Motion
- BrandApplied Motion
- RoHSDetails
- SubcategoryInput Devices
- Product Type
a group of products which fulfill a similar need for a market segment or market as a whole.
Input Devices - Product Category
a particular group of related products.
Input Devices
0 Similar Products Remaining
Hot Sale
BLUMTR-BK-FA-20
Applied MotionThe BLUMTR-BK-FA-20 feedback cable connects the motor power and holding brake leads of an M Series servo motor to the corresponding connections of an Applied Motion servo drive.YAA ENCODER
Applied MotionThe YAA incremental encoder fits on the rear shafts of HT34 step motors with 3/8” diameter rear shafts. This includes the following motors:3004-263
Applied MotionThe 3004-263 encoder extension cable is designed for use with STM17R and STM23R integrated steppers with incremental encoders mounted to the rear shafts. This includes the following integrated stepper part numbers:3004-278-5M
Applied MotionOne 3004-278 serial programming cable is required with all SWM24 drive+motor models with an RS-232 port. The 3004-278 is used for setup and programming of a drive, but can also be used in streaming serial command (SCL) applications as a permanent connection between the drive and the host device’s RS-232 port.ZAA-ENCODER
Applied MotionThe ZAA incremental encoder fits on the rear shafts of HT23 and HT24 step motors. To order the encoder factory-assembled onto the rear shaft of the motor add the ZAA suffix to the end of the double-shaft step motor part number. For example, order HT23-601D-ZAA to purchase the HT23-601D step motor and ZAA encoder as a single, factory-assembled part number.3004-190
Applied MotionThe 3004-190 Hub/MMI Cable is a replacement cable for SiNet Hub multi-axis controllers and MMI operator interfaces. The cable can be used to connect a SiNet Hub-compatible stepper or servo drive to one of the available ports of a SiNet Hub 444 or 8. It also cable can also be used to connect an MMI-01 or MMI-02 operator interface panel to the PC/MMI port of an Si stepper or servo drive, or the PC/MMI port of a SiNet Hub.MMI-02
Applied MotionThe MMI-02 is an easy-to-use operator interface accessory for Si Programmer™. The MMI-02 connects directly to an i or Si drive’s serial programming port and makes user access of internal Si program parameters a snap. The MMI-02 is also available in a non-backlit version, the