Analog Devices Inc. OP97EPZ

Lifecycle Status

PRODUCTION (Last Updated: 1 week ago)

Factory Lead Time

10 Weeks

Contact Plating

Contact plating (finish) provides corrosion protection for base metals and optimizes the mechanical and electrical properties of the contact interfaces.

Tin

Mounting Type

Through Hole

Package / Case

8-DIP (0.300, 7.62mm)

Surface Mount

having leads that are designed to be soldered on the side of a circuit board that the body of the component is mounted on.

NO

Number of Pins

8

Operating Temperature

The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

-40°C~85°C

Packaging

Semiconductor package is a carrier / shell used to contain and cover one or more semiconductor components or integrated circuits. The material of the shell can be metal, plastic, glass or ceramic.

Tube

JESD-609 Code

e3

Pbfree Code

no

Part Status

Parts can have many statuses as they progress through the configuration, analysis, review, and approval stages.

Active

Moisture Sensitivity Level (MSL)

1 (Unlimited)

Number of Terminations

8

ECCN Code

EAR99

Terminal Position

DUAL

Number of Functions

1

Supply Voltage

15V

Terminal Pitch

The center distance from one pole to the next.

2.54mm

Base Part Number

OP97

Pin Count

a count of all of the component leads (or pins)

8

Number of Channels

1

Operating Supply Current

600μA

Quiescent Current

The quiescent current is defined as the current level in the amplifier when it is producing an output of zero.

600μA

Slew Rate

the maximum rate of output voltage change per unit time.

0.2V/μs

Architecture

VOLTAGE-FEEDBACK

Amplifier Type

General Purpose

Common Mode Rejection Ratio

132 dB

Current - Input Bias

30pA

Voltage - Supply, Single/Dual (±)

±2V~20V

Input Offset Voltage (Vos)

25μV

Gain Bandwidth Product

The gain–bandwidth product (designated as GBWP, GBW, GBP, or GB) for an amplifier is the product of the amplifier's bandwidth and the gain at which the bandwidth is measured.

900 kHz

Neg Supply Voltage-Nom (Vsup)

-15V

Unity Gain BW-Nom

900 kHz

Voltage Gain

126.02dB

Average Bias Current-Max (IIB)

0.00025μA

Power Supply Rejection Ratio (PSRR)

132dB

Low-Offset

YES

Frequency Compensation

Frequency compensation is implemented by modifying the gain and phase characteristics of the amplifier's open loop output or of its feedback network, or both, in such a way as to avoid the conditions leading to oscillation. This is usually done by the internal or external use of resistance-capacitance networks.

YES

Supply Voltage Limit-Max

20V

Voltage - Input Offset

10μV

Low-Bias

YES

Micropower

the use of very small electric generators and prime movers or devices to convert heat or motion to electricity, for use close to the generator.

YES

Dual Supply Voltage

15V

Neg Supply Voltage-Max (Vsup)

-20V

Input Voltage Noise Density

17nV/sqrt Hz

Height

3.43mm

Length

9.27mm

Width

7.24mm

REACH SVHC

No SVHC

Radiation Hardening

Radiation hardening is the process of making electronic components and circuits resistant to damage or malfunction caused by high levels of ionizing radiation, especially for environments in outer space (especially beyond the low Earth orbit), around nuclear reactors and particle accelerators, or during nuclear accidents or nuclear warfare.

No

RoHS Status

RoHS means “Restriction of Certain Hazardous Substances” in the “Hazardous Substances Directive” in electrical and electronic equipment.

ROHS3 Compliant

Lead Free

Contains Lead