Analog Devices Inc. OP97EP

Mounting Type

Through Hole

Package / Case

8-DIP (0.300, 7.62mm)

Surface Mount

having leads that are designed to be soldered on the side of a circuit board that the body of the component is mounted on.

NO

Operating Temperature

The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

-40°C~85°C

Packaging

Semiconductor package is a carrier / shell used to contain and cover one or more semiconductor components or integrated circuits. The material of the shell can be metal, plastic, glass or ceramic.

Tube

JESD-609 Code

e0

Pbfree Code

no

Part Status

Parts can have many statuses as they progress through the configuration, analysis, review, and approval stages.

Obsolete

Moisture Sensitivity Level (MSL)

1 (Unlimited)

Number of Terminations

8

ECCN Code

EAR99

Terminal Position

DUAL

Peak Reflow Temperature (Cel)

NOT APPLICABLE

Number of Functions

1

Supply Voltage

15V

Terminal Pitch

The center distance from one pole to the next.

2.54mm

Reach Compliance Code

not_compliant

Time@Peak Reflow Temperature-Max (s)

NOT APPLICABLE

Base Part Number

OP97

Pin Count

a count of all of the component leads (or pins)

8

JESD-30 Code

R-PDIP-T8

Qualification Status

An indicator of formal certification of qualifications.

Not Qualified

Number of Circuits

1

Current - Supply

380μA

Slew Rate

the maximum rate of output voltage change per unit time.

0.2V/μs

Architecture

VOLTAGE-FEEDBACK

Amplifier Type

General Purpose

Common Mode Rejection Ratio

128 dB

Current - Input Bias

30pA

Voltage - Supply, Single/Dual (±)

±2V~20V

Neg Supply Voltage-Nom (Vsup)

-15V

Unity Gain BW-Nom

900 kHz

Average Bias Current-Max (IIB)

0.00025μA

Low-Offset

YES

Frequency Compensation

Frequency compensation is implemented by modifying the gain and phase characteristics of the amplifier's open loop output or of its feedback network, or both, in such a way as to avoid the conditions leading to oscillation. This is usually done by the internal or external use of resistance-capacitance networks.

YES

Supply Voltage Limit-Max

20V

Voltage - Input Offset

10μV

Low-Bias

YES

Micropower

the use of very small electric generators and prime movers or devices to convert heat or motion to electricity, for use close to the generator.

YES

-3db Bandwidth

900kHz

Neg Supply Voltage-Max (Vsup)

-20V

Voltage Gain-Min

300000

Length

9.27mm

Height Seated (Max)

5.33mm

RoHS Status

RoHS means “Restriction of Certain Hazardous Substances” in the “Hazardous Substances Directive” in electrical and electronic equipment.

Non-RoHS Compliant