Analog Devices, Inc. LT1719CS8#PBF

Lifecycle Status

PRODUCTION (Last Updated: 3 months ago)

Package / Case

S

Number of Pins

8

Number of Elements

1

Type

General Purpose

Max Operating Temperature

The Maximum Operating Temperature is the maximum body temperature at which the thermistor is designed to operate for extended periods of time with acceptable stability of its electrical characteristics.

70°C

Min Operating Temperature

0°C

Output Type

TTL

Operating Supply Voltage

The voltage level by which an electrical system is designated and to which certain operating characteristics of the system are related.

5V

Number of Channels

1

Max Supply Voltage

In general, the absolute maximum common-mode voltage is VEE-0.3V and VCC+0.3V, but for products without a protection element at the VCC side, voltages up to the absolute maximum rated supply voltage (i.e. VEE+36V) can be supplied, regardless of supply voltage.

10.5V

Min Supply Voltage

The minimum supply voltage (V min ) is explored for sequential logic circuits by statistically simulating the impact of within-die process variations and gate-dielectric soft breakdown on data retention and hold time.

2.7V

Max Supply Current

7mA

Current - Output

20mA

Propagation Delay

the flight time of packets over the transmission link and is limited by the speed of light.

13 ns

Quiescent Current

The quiescent current is defined as the current level in the amplifier when it is producing an output of zero.

9mA

Turn On Delay Time

Turn-on delay, td(on), is the time taken to charge the input capacitance of the device before drain current conduction can start.

4.5 ns

Response Time

the time taken for a circuit or measuring device, when subjected to a change in input signal, to change its state by a specified fraction of its total response to that change.

4 ns

Common Mode Rejection Ratio

70 dB

Current - Input Bias

6μA

Input Offset Voltage (Vos)

2.5mV

Power Supply Rejection Ratio (PSRR)

80dB

Max Dual Supply Voltage

A Dual power supply is a regular direct current power supply. It can provide a positive as well as negative voltage. It ensures stable power supply to the device as well as it helps to prevent system damage.

3V

Min Dual Supply Voltage

1.35V

Hysteresis

7 mV

Length

5mm

Width

3.99mm

Height

1.5mm

REACH SVHC

No SVHC

Radiation Hardening

Radiation hardening is the process of making electronic components and circuits resistant to damage or malfunction caused by high levels of ionizing radiation, especially for environments in outer space (especially beyond the low Earth orbit), around nuclear reactors and particle accelerators, or during nuclear accidents or nuclear warfare.

No

RoHS Status

RoHS means “Restriction of Certain Hazardous Substances” in the “Hazardous Substances Directive” in electrical and electronic equipment.

RoHS Compliant

Lead Free

Lead Free