Analog Devices Inc. ADP5040ACPZ-1-R7

Lifecycle Status

PRODUCTION (Last Updated: 3 weeks ago)

Factory Lead Time

8 Weeks

Contact Plating

Contact plating (finish) provides corrosion protection for base metals and optimizes the mechanical and electrical properties of the contact interfaces.

Tin

Mounting Type

Surface Mount

Package / Case

20-WFQFN Exposed Pad, CSP

Surface Mount

having leads that are designed to be soldered on the side of a circuit board that the body of the component is mounted on.

YES

Number of Pins

20

Voltage-Output 1

3.8V

Usage Level

Automotive grade

Operating Temperature

The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

-40°C~125°C

Packaging

Semiconductor package is a carrier / shell used to contain and cover one or more semiconductor components or integrated circuits. The material of the shell can be metal, plastic, glass or ceramic.

Cut Tape (CT)

JESD-609 Code

e3

Pbfree Code

no

Part Status

Parts can have many statuses as they progress through the configuration, analysis, review, and approval stages.

Active

Moisture Sensitivity Level (MSL)

3 (168 Hours)

Number of Terminations

20

ECCN Code

EAR99

Additional Feature

Any Feature, including a modified Existing Feature, that is not an Existing Feature.

ALSO OPERATES AS LDO REGULATOR

Voltage - Supply

1.7V~5.5V

Terminal Position

QUAD

Peak Reflow Temperature (Cel)

260

Number of Functions

1

Terminal Pitch

The center distance from one pole to the next.

0.5mm

Time@Peak Reflow Temperature-Max (s)

30

Base Part Number

ADP5040

Pin Count

a count of all of the component leads (or pins)

20

Number of Outputs

3

Output Voltage

3.8V

Output Type

Fixed

Max Output Current

The maximum current that can be supplied to the load.

1.2kA

Operating Supply Voltage

The voltage level by which an electrical system is designated and to which certain operating characteristics of the system are related.

5.5V

Input Voltage-Nom

3.6V

Interface

GPIO

Analog IC - Other Type

SWITCHING REGULATOR

Output Current

The rated output current is the maximum load current that a power supply can provide at a specified ambient temperature. A power supply can never provide more current that it's rated output current unless there is a fault, such as short circuit at the load.

1.2A

Quiescent Current

The quiescent current is defined as the current level in the amplifier when it is producing an output of zero.

10μA

Accuracy

3 %

Max Output Voltage

The maximum output voltage refers to the dynamic area beyond which the output is saturated in the positive or negative direction, and is limited according to the load resistance value.

4.75V

Voltage - Output 2

5.2V

Topology

Step-Down (Buck) Synchronous (1), Linear (LDO) (2)

Min Input Voltage

2.3V

Control Mode

CURRENT-MODE

Frequency - Switching

3MHz

Max Input Voltage

5.5V

Control Technique

PULSE WIDTH MODULATION

Reference Voltage

A voltage reference is an electronic device that ideally produces a fixed (constant) voltage irrespective of the loading on the device, power supply variations, temperature changes, and the passage of time. Voltage references are used in power supplies, analog-to-digital converters, digital-to-analog converters, and other measurement and control systems. Voltage references vary widely in performance; a regulator for a computer power supply may only hold its value to within a few percent of the nominal value, whereas laboratory voltage standards have precisions and stability measured in parts per million.

515mV

Current - Output 1

1.2A

Voltage - Output 3

5.2V

Min Output Voltage

800mV

Current - Output 2

300mA

w/Sequencer

No

Voltage/Current - Output 1

0.8V~3.8V 1.2A

Current - Output 3

300mA

Voltage/Current - Output 2

0.8V~5.2V 300mA

Voltage/Current - Output 3

0.8V~5.2V 300mA

Height

730μm

Length

4mm

Width

4.1mm

REACH SVHC

No SVHC

RoHS Status

RoHS means “Restriction of Certain Hazardous Substances” in the “Hazardous Substances Directive” in electrical and electronic equipment.

ROHS3 Compliant

Lead Free

Contains Lead