Analog Devices Inc. ADP1755ACPZ-R7

Lifecycle Status

PRODUCTION (Last Updated: 1 month ago)

Factory Lead Time

12 Weeks

Mounting Type

Surface Mount

Package / Case

16-WQFN Exposed Pad, CSP

Surface Mount

having leads that are designed to be soldered on the side of a circuit board that the body of the component is mounted on.

YES

Number of Pins

16

Operating Temperature

The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

-40°C~125°C

Packaging

Semiconductor package is a carrier / shell used to contain and cover one or more semiconductor components or integrated circuits. The material of the shell can be metal, plastic, glass or ceramic.

Tape & Reel (TR)

JESD-609 Code

e3

Pbfree Code

no

Part Status

Parts can have many statuses as they progress through the configuration, analysis, review, and approval stages.

Active

Moisture Sensitivity Level (MSL)

3 (168 Hours)

Number of Terminations

16

ECCN Code

EAR99

Terminal Finish

Matte Tin (Sn)

Packing Method

TR

Terminal Position

QUAD

Peak Reflow Temperature (Cel)

260

Number of Functions

1

Terminal Pitch

The center distance from one pole to the next.

0.65mm

Time@Peak Reflow Temperature-Max (s)

40

Base Part Number

ADP1755

Pin Count

a count of all of the component leads (or pins)

16

Number of Outputs

1

Voltage - Input (Max)

3.6V

Output Voltage

3V

Output Type

Adjustable

Max Output Current

The maximum current that can be supplied to the load.

1.2A

Operating Supply Current

1.4mA

Nominal Supply Current

Nominal current is the same as the rated current. It is the current drawn by the motor while delivering rated mechanical output at its shaft.

1.4mA

Output Configuration

Positive

Max Supply Current

1.4mA

Control Features

Enable, Power Good, Soft Start

Accuracy

2 %

Max Output Voltage

The maximum output voltage refers to the dynamic area beyond which the output is saturated in the positive or negative direction, and is limited according to the load resistance value.

3V

Voltage - Output (Min/Fixed)

0.75V

Number of Regulators

A regulator is a mechanism or device that controls something such as pressure, temperature, or fluid flow. The voltage regulator keeps the power level stabilized. A regulator is a mechanism or device that controls something such as pressure, temperature, or fluid flow.

1

Min Input Voltage

1.6V

Protection Features

Over Current, Over Temperature, Reverse Polarity, Under Voltage Lockout (UVLO)

Current - Quiescent (Iq)

800μA

Voltage Dropout (Max)

0.2V @ 1.2A

PSRR

65dB ~ 51dB (1kHz ~ 100kHz)

Reference Voltage

A voltage reference is an electronic device that ideally produces a fixed (constant) voltage irrespective of the loading on the device, power supply variations, temperature changes, and the passage of time. Voltage references are used in power supplies, analog-to-digital converters, digital-to-analog converters, and other measurement and control systems. Voltage references vary widely in performance; a regulator for a computer power supply may only hold its value to within a few percent of the nominal value, whereas laboratory voltage standards have precisions and stability measured in parts per million.

500mV

Dropout Voltage

Dropout voltage is the input-to-output differential voltage at which the circuit ceases to regulate against further reductions in input voltage; this point occurs when the input voltage approaches the output voltage.

200mV

Min Output Voltage

750mV

Power Supply Rejection Ratio (PSRR)

65dB

Min Current Limit

1.5A

Output Voltage Accuracy

2 %

Load Regulation-Max(%)

0.6%

Height

800μm

Length

4.1mm

Width

4.1mm

REACH SVHC

No SVHC

Radiation Hardening

Radiation hardening is the process of making electronic components and circuits resistant to damage or malfunction caused by high levels of ionizing radiation, especially for environments in outer space (especially beyond the low Earth orbit), around nuclear reactors and particle accelerators, or during nuclear accidents or nuclear warfare.

No

RoHS Status

RoHS means “Restriction of Certain Hazardous Substances” in the “Hazardous Substances Directive” in electrical and electronic equipment.

ROHS3 Compliant

Lead Free

Contains Lead