Analog Devices Inc. ADG901BRMZ-REEL7

Lifecycle Status

PRODUCTION (Last Updated: 2 weeks ago)

Factory Lead Time

8 Weeks

Contact Plating

Contact plating (finish) provides corrosion protection for base metals and optimizes the mechanical and electrical properties of the contact interfaces.

Tin

Mount

Surface Mount

Package / Case

8-TSSOP, 8-MSOP (0.118, 3.00mm Width)

Number of Pins

8

Operating Frequency (Max)

2500MHz

Turn Off Delay Time

It is the time from when Vgs drops below 90% of the gate drive voltage to when the drain current drops below 90% of the load current. It is the delay before current starts to transition in the load, and depends on Rg. Ciss.

5.8 ns

Operating Temperature

The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

-40°C~85°C

Packaging

Semiconductor package is a carrier / shell used to contain and cover one or more semiconductor components or integrated circuits. The material of the shell can be metal, plastic, glass or ceramic.

Tape & Reel (TR)

JESD-609 Code

e3

Pbfree Code

no

Part Status

Parts can have many statuses as they progress through the configuration, analysis, review, and approval stages.

Active

Moisture Sensitivity Level (MSL)

1 (Unlimited)

Number of Terminations

8

ECCN Code

EAR99

Max Power Dissipation

The maximum power that the MOSFET can dissipate continuously under the specified thermal conditions.

2.5μW

Voltage - Supply

1.65V~2.75V

Number of Functions

1

Construction

COMPONENT

Base Part Number

ADG901

Pin Count

a count of all of the component leads (or pins)

8

Number of Outputs

1

Operating Supply Voltage

The voltage level by which an electrical system is designated and to which certain operating characteristics of the system are related.

2.75V

Circuit

SPST

Interface

Parallel

Test Frequency

a statistical procedure for assessing data that contain counts or the numbers of occurrences of various categories or classes.

1GHz

Impedance

In electrical engineering, impedance is the opposition to alternating current presented by the combined effect of resistance and reactance in a circuit.

50Ohm

Power Dissipation

the process by which an electronic or electrical device produces heat (energy loss or waste) as an undesirable derivative of its primary action.

2.5μW

Number of Bits

3

Turn On Delay Time

Turn-on delay, td(on), is the time taken to charge the input capacitance of the device before drain current conduction can start.

3.6 ns

Topology

Absorptive

-3db Bandwidth

4.5 GHz

Max Frequency

2.5GHz

Frequency Range

A continuous range or spectrum of frequencies that extends from one limiting frequency to another.

0Hz~4.5GHz

RF/Microwave Device Type

DIVERSITY SWITCH

Isolation

40dB

Insertion Loss (dB)

0.8 dB

RF Type

The rate of oscillation of electromagnetic radio waves in the range of 3 kHz to 3 GHz, as well as the alternating currents carrying the radio signals.

ASK/FSK

P1dB

17dBm

IIP3

36dBm

On Time-Nom

0.0036 μs

Length

3mm

Width

3mm

Thickness

850μm

RoHS Status

RoHS means “Restriction of Certain Hazardous Substances” in the “Hazardous Substances Directive” in electrical and electronic equipment.

ROHS3 Compliant

Lead Free

Contains Lead