ADG3241BKSZ-REEL7
6-TSSOP, SC-88, SOT-363
7536165-ADG3241BKSZ-REEL7
Bus Switch 1-Element CMOS 1-IN 6-Pin SC-70 T/R
having leads that are designed to be soldered on the side of a circuit board that the body of the component is mounted on.
Contact plating (finish) provides corrosion protection for base metals and optimizes the mechanical and electrical properties of the contact interfaces.
Semiconductor package is a carrier / shell used to contain and cover one or more semiconductor components or integrated circuits. The material of the shell can be metal, plastic, glass or ceramic.
The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.
Parts can have many statuses as they progress through the configuration, analysis, review, and approval stages.
Occurring at or forming the end of a series, succession, or the like; closing; concluding.
a count of all of the component leads (or pins)
An indicator of formal certification of qualifications.
an electronic circuit that converts the voltage of an alternating current (AC) into a direct current (DC) voltage.?
A port is identified for each transport protocol and address combination by a 16-bit unsigned number,.
the flight time of packets over the transmission link and is limited by the speed of light.
The quiescent current is defined as the current level in the amplifier when it is producing an output of zero.
Turn-on delay, td(on), is the time taken to charge the input capacitance of the device before drain current conduction can start.
Data Rate is defined as the amount of data transmitted during a specified time period over a network. It is the speed at which data is transferred from one device to another or between a peripheral device and the computer. It is generally measured in Mega bits per second(Mbps) or Mega bytes per second(MBps).
High-level Output Current IOH The current flowing into the output at a specified high- level voltage. Low-level Output Current IOL The current flowing into the output at a specified low- level output voltage.
The current into the output terminal with input conditions applied that, according to the product specification, will establish a low level at the output.
A voltage source is a two-terminal device which can maintain a fixed voltage. An ideal voltage source can maintain the fixed voltage independent of the load resistance or the output current. However, a real-world voltage source cannot supply unlimited current. A voltage source is the dual of a current source.
RoHS means “Restriction of Certain Hazardous Substances” in the “Hazardous Substances Directive” in electrical and electronic equipment.