Analog Devices Inc. ADA4941-1YCPZ-R7

Factory Lead Time

8 Weeks

Lifecycle Status

PRODUCTION (Last Updated: 2 weeks ago)

Package / Case

8-WFDFN Exposed Pad, CSP

Mounting Type

Surface Mount

Mount

Surface Mount

Contact Plating

Contact plating (finish) provides corrosion protection for base metals and optimizes the mechanical and electrical properties of the contact interfaces.

Tin

Number of Pins

8

Number of Elements

2

Interface Standards

GENERAL PURPOSE

Packaging

Semiconductor package is a carrier / shell used to contain and cover one or more semiconductor components or integrated circuits. The material of the shell can be metal, plastic, glass or ceramic.

Tape & Reel (TR)

JESD-609 Code

e3

Pbfree Code

no

Part Status

Parts can have many statuses as they progress through the configuration, analysis, review, and approval stages.

Active

Moisture Sensitivity Level (MSL)

3 (168 Hours)

ECCN Code

EAR99

Type

ADC Driver

Resistance

24MOhm

Max Operating Temperature

The Maximum Operating Temperature is the maximum body temperature at which the thermistor is designed to operate for extended periods of time with acceptable stability of its electrical characteristics.

125°C

Min Operating Temperature

-40°C

Applications

Data Acquisition

Terminal Position

DUAL

Peak Reflow Temperature (Cel)

260

Number of Functions

1

Supply Voltage

3V

Terminal Pitch

The center distance from one pole to the next.

0.5mm

Time@Peak Reflow Temperature-Max (s)

40

Base Part Number

ADA4941

Pin Count

a count of all of the component leads (or pins)

8

Temperature Grade

Temperature grades represent a tire's resistance to heat and its ability to dissipate heat when tested under controlled laboratory test conditions.

AUTOMOTIVE

Max Supply Voltage

In general, the absolute maximum common-mode voltage is VEE-0.3V and VCC+0.3V, but for products without a protection element at the VCC side, voltages up to the absolute maximum rated supply voltage (i.e. VEE+36V) can be supplied, regardless of supply voltage.

12V

Min Supply Voltage

The minimum supply voltage (V min ) is explored for sequential logic circuits by statistically simulating the impact of within-die process variations and gate-dielectric soft breakdown on data retention and hold time.

2.7V

Operating Supply Current

2.3mA

Nominal Supply Current

Nominal current is the same as the rated current. It is the current drawn by the motor while delivering rated mechanical output at its shaft.

2.5mA

Output Current

The rated output current is the maximum load current that a power supply can provide at a specified ambient temperature. A power supply can never provide more current that it's rated output current unless there is a fault, such as short circuit at the load.

25mA

Min Input Voltage

2.7V

Slew Rate

the maximum rate of output voltage change per unit time.

22 V/μs

Common Mode Rejection Ratio

84 dB

Max Input Voltage

12V

Output Current per Channel

25mA

Input Offset Voltage (Vos)

100μV

Gain Bandwidth Product

The gain–bandwidth product (designated as GBWP, GBW, GBP, or GB) for an amplifier is the product of the amplifier's bandwidth and the gain at which the bandwidth is measured.

32MHz

Differential Output

a differential output voltage in electronics is the difference between the values of two AC voltages, 180° out of phase, present at the output terminals of an amplifier when you apply a differential input voltage to the input terminals of an amplifier.

YES

Voltage Gain

6.06dB

Power Supply Rejection Ratio (PSRR)

87dB

Settling Time

In control theory the settling time of a dynamical system such as an amplifier or other output device is the time elapsed from the application of an ideal instantaneous step input to the time at which the amplifier output has entered and remained within a specified error band.

980 ns

Input Characteristics

DIFFERENTIAL

-3db Bandwidth

30MHz

Driver Number of Bits

1

Input Bias Current

4.5μA

Number of Amplifiers

1

Height Seated (Max)

0.9mm

Length

3mm

RoHS Status

RoHS means “Restriction of Certain Hazardous Substances” in the “Hazardous Substances Directive” in electrical and electronic equipment.

ROHS3 Compliant

Radiation Hardening

Radiation hardening is the process of making electronic components and circuits resistant to damage or malfunction caused by high levels of ionizing radiation, especially for environments in outer space (especially beyond the low Earth orbit), around nuclear reactors and particle accelerators, or during nuclear accidents or nuclear warfare.

No

REACH SVHC

No SVHC

Lead Free

Contains Lead