Analog Devices MAX8722CEEG T

Mounting Type

Surface Mount

Package / Case

24-SSOP (0.154, 3.90mm Width)

Number of Pins

24

Supplier Device Package

24-QSOP

RoHS

Compliant

Package

Tape & Reel (TR)

Base Product Number

MAX8722

Mfr

Analog Devices Inc./Maxim Integrated

Product Status

Obsolete

Series

*

Operating Temperature

The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

-40°C ~ 85°C

Part Status

Parts can have many statuses as they progress through the configuration, analysis, review, and approval stages.

Active

Type

CCFL Controller

Max Operating Temperature

The Maximum Operating Temperature is the maximum body temperature at which the thermistor is designed to operate for extended periods of time with acceptable stability of its electrical characteristics.

85 °C

Min Operating Temperature

-40 °C

Max Power Dissipation

The maximum power that the MOSFET can dissipate continuously under the specified thermal conditions.

761.9 mW

Voltage - Supply

4.6V ~ 28V

Frequency

80 kHz

Max Supply Voltage

In general, the absolute maximum common-mode voltage is VEE-0.3V and VCC+0.3V, but for products without a protection element at the VCC side, voltages up to the absolute maximum rated supply voltage (i.e. VEE+36V) can be supplied, regardless of supply voltage.

28 V

Min Supply Voltage

The minimum supply voltage (V min ) is explored for sequential logic circuits by statistically simulating the impact of within-die process variations and gate-dielectric soft breakdown on data retention and hold time.

4.6 V

Operating Supply Current

1 mA

Nominal Supply Current

Nominal current is the same as the rated current. It is the current drawn by the motor while delivering rated mechanical output at its shaft.

1 mA

Output Current

The rated output current is the maximum load current that a power supply can provide at a specified ambient temperature. A power supply can never provide more current that it's rated output current unless there is a fault, such as short circuit at the load.

300 mA

Current - Supply

1 mA

Dimming

Yes

Current - Output Source/Sink

-