Analog Devices MAX2140ETH D

Mounting Type

Surface Mount

Package / Case

44-WFQFN Exposed Pad

Supplier Device Package

44-TQFN (7x7)

Qualification

-

Voltage, Rating

150V

Package

Tray

Mfr

Analog Devices Inc./Maxim Integrated

Product Status

Obsolete

Operating Temperature

The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

-40°C ~ 85°C

Series

-

Temperature Coefficient

The resistance-change factor per degree Celsius of temperature change is called the temperature coefficient of resistance. This factor is represented by the Greek lower-case letter “alpha” (α). A positive coefficient for a material means that its resistance increases with an increase in temperature.

± 100ppm/°C

Resistance

150ohm

Applications

SDARS

Power Rating

250mW

Voltage - Supply

3.1V ~ 3.6V

Resistor Type

High Power

Frequency

2.4GHz

Memory Size

The memory capacity is the amount of data a device can store at any given time in its memory.

-

Data Interface

A Data Interface in EDQ is a template of a set of attributes representing a given entity, used to create processes that read from, or write to, interfaces rather than directly from or to sources or targets of data.

I²C

Sensitivity

-91dBm

Resistance Tolerance

Tolerance is the percentage of error in the resistor's resistance, or how much more or less you can expect a resistor's actual measured resistance to be from its stated resistance. A gold tolerance band is 5% tolerance, silver is 10%, and no band at all would mean a 20% tolerance.

± 1%

Data Rate (Max)

400kbps

Current - Receiving

180mA

Modulation or Protocol

Modulation is the process of converting data into radio waves by adding information to an electronic or optical carrier signal. A carrier signal is one with a steady waveform -- constant height, or amplitude, and frequency.

-

Antenna Connector

An antenna connector is a radio frequency connector that is located at the termination of an antenna. Its attachment to the antenna provides a conduit for the transmission of radio frequency signals with signal loss, discontinuity, and impedance mismatches kept to a strict minimum.

PCB, Surface Mount

Features

OCP

Product Length

2mm

Product Width

1.25mm