Analog Devices MAX20444BATG/VY

Package / Case

Axial

Mounting Type

Surface Mount

Supplier Device Package

Axial

Package

Tube

Base Product Number

MAX20444

Mfr

Analog Devices Inc./Maxim Integrated

Product Status

Active

Development Kit

MAX20444BEVKIT#

Pd - Power Dissipation

2.857 W

Maximum Operating Temperature

the maximum body temperature at which the thermistor is designed to operate for extended periods of time with acceptable stability of its electrical characteristics.

+ 125 C

Minimum Operating Temperature

- 40 C

Mounting Styles

SMD/SMT

Input Voltage-Max

36 V

Input Voltage-Min

4.5 V

Operating Temperature

The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

-65°C ~ 275°C

Series

CA

Packaging

Semiconductor package is a carrier / shell used to contain and cover one or more semiconductor components or integrated circuits. The material of the shell can be metal, plastic, glass or ceramic.

Tape & Reel (TR)

Size / Dimension

0.170 Dia x 0.460 L (4.32mm x 11.68mm)

Tolerance

±5%

Part Status

Parts can have many statuses as they progress through the configuration, analysis, review, and approval stages.

Active

Number of Terminations

2

Temperature Coefficient

The resistance-change factor per degree Celsius of temperature change is called the temperature coefficient of resistance. This factor is represented by the Greek lower-case letter “alpha” (α). A positive coefficient for a material means that its resistance increases with an increase in temperature.

±300ppm/°C

Type

DC DC Controller

Resistance

10 Ohms

Composition

Wirewound

Applications

Automotive, Backlight

Power (Watts)

1W

Subcategory

Driver ICs

Frequency

400kHz ~ 2.2MHz

Number of Outputs

4

Operating Frequency

Operating frequency is the frequency at which the communications are being made with the total bandwidth occupied by the carrier signal with modulation. Usually bandwidth of the antenna will be wider than the bandwidth of the signal so that more than one center frequency the antenna can be put in to effective use.

400 kHz to 2.2 MHz

Output Voltage

1.25 V to 36 V

Failure Rate

the frequency with which an engineered system or component fails, expressed in failures per unit of time. It is usually denoted by the Greek letter λ (lambda) and is often used in reliability engineering.

--

Number of Channels

4 Channel

Output Current

The rated output current is the maximum load current that a power supply can provide at a specified ambient temperature. A power supply can never provide more current that it's rated output current unless there is a fault, such as short circuit at the load.

130 mA

Supply Current-Max

11 mA

Voltage - Output

52V

Topology

Boost, SEPIC

Product Type

a group of products which fulfill a similar need for a market segment or market as a whole.

LED Lighting Drivers

Current - Output / Channel

-

Internal Switch(s)

Yes

Dimming

Analog, I²C, PWM

Voltage - Supply (Max)

36V

Voltage - Supply (Min)

4.5V

Product

LED Lighting Drivers

Features

--

Input Voltage

4.5 V to 36 V

Height Seated (Max)

--