DS2502X1+

Analog Devices DS2502X1+

Part No:

DS2502X1+

Manufacturer:

Analog Devices

Datasheet:

Package:

4-UFBGA, WLCSP

AINNX NO:

50160749-DS2502X1+

Category:

Memory

Description:

EPROM 8-Bit 1Kbit Add-Only Memory 2.8V to 6V 2-Pin Flip-Chip

Products specifications
  • Mounting Type
    Surface Mount
  • Package / Case
    4-UFBGA, WLCSP
  • Number of Pins
    4
  • Supplier Device Package
    4-WLP (1.62x0.93)
  • RoHS
    Compliant
  • Memory Types
    EPROM, EPROMs, OTP
  • Package
    Tape & Reel (TR)
  • Base Product Number
    DS2502
  • Mfr
    Analog Devices Inc./Maxim Integrated
  • Product Status
    Active
  • Operating Temperature

    The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

    -40°C ~ 85°C (TA)
  • Series
    -
  • Max Operating Temperature

    The Maximum Operating Temperature is the maximum body temperature at which the thermistor is designed to operate for extended periods of time with acceptable stability of its electrical characteristics.

    85 °C
  • Min Operating Temperature
    -40 °C
  • Technology
    EPROM - OTP
  • Voltage - Supply
    2.8V ~ 6V
  • Interface
    Serial
  • Max Supply Voltage

    In general, the absolute maximum common-mode voltage is VEE-0.3V and VCC+0.3V, but for products without a protection element at the VCC side, voltages up to the absolute maximum rated supply voltage (i.e. VEE+36V) can be supplied, regardless of supply voltage.

    6 V
  • Min Supply Voltage

    The minimum supply voltage (V min ) is explored for sequential logic circuits by statistically simulating the impact of within-die process variations and gate-dielectric soft breakdown on data retention and hold time.

    2.8 V
  • Memory Size

    The memory capacity is the amount of data a device can store at any given time in its memory.

    128 B
  • Operating Supply Current
    5 µA
  • Memory Format
    EPROM
  • Memory Interface

    An external memory interface is a bus protocol for communication from an integrated circuit, such as a microprocessor, to an external memory device located on a circuit board.

    1-Wire®
  • Write Cycle Time - Word, Page
    -
  • Density
    1 kb
  • Memory Organization
    128 x 8
  • Radiation Hardening

    Radiation hardening is the process of making electronic components and circuits resistant to damage or malfunction caused by high levels of ionizing radiation, especially for environments in outer space (especially beyond the low Earth orbit), around nuclear reactors and particle accelerators, or during nuclear accidents or nuclear warfare.

    No
  • Lead Free
    Contains Lead
0 Similar Products Remaining
Documents & Media Download datasheets and manufacturer documentation for Analog Devices DS2502X1+.
  • Datasheets :