DS1312S-2

Analog Devices DS1312S-2

Part No:

DS1312S-2

Manufacturer:

Analog Devices

Datasheet:

Package:

4-SMD, No Lead

AINNX NO:

39005148-DS1312S-2

Description:

Memory Controller,Nonvolatile SRAM, 10% Voltage Tolerance, 4.5V to 5.5V Supply, NSOIC-8

Products specifications
  • Mounting Type
    Surface Mount
  • Package / Case
    4-SMD, No Lead
  • Supplier Device Package
    8-SOIC
  • Package
    Tape & Reel (TR);Cut Tape (CT);Digi-Reel®;
  • Mfr
    TST
  • Product Status
    Active
  • MSL
    MSL 1 - Unlimited
  • Base Product Number
    DS1312
  • Maximum Operating Temperature

    the maximum body temperature at which the thermistor is designed to operate for extended periods of time with acceptable stability of its electrical characteristics.

    + 85 C
  • Supply Voltage-Max
    5.5 V
  • Minimum Operating Temperature
    - 40 C
  • Supply Voltage-Min
    4.5 V
  • Mounting Styles
    SMD/SMT
  • Battery Backup Switching
    Yes
  • Memory Types
    Nonvolatile SRAM
  • Operating Temperature

    The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

    -40°C ~ 85°C
  • Series
    -
  • Size / Dimension
    0.126 L x 0.098 W (3.20mm x 2.50mm)
  • Type
    MHz Crystal
  • Voltage - Supply
    4.75V ~ 5.5V
  • Frequency
    25 MHz
  • Frequency Stability

    the variation of output frequency of a crystal oscillator due to external conditions like temperature variation, voltage variation, output load variation, and frequency aging.

    ±30ppm
  • ESR (Equivalent Series Resistance)
    40 Ohms
  • Operating Supply Current
    50 uA, 200 uA
  • Load Capacitance

    the amount of capacitance measured or computed across the crystal terminals on the PCB. Frequency Tolerance. Frequency tolerance refers to the allowable deviation from nominal, in parts per million (PPM), at a specific temperature, usually +25°C.

    18pF
  • Operating Mode

    A phase of operation during the operation and maintenance stages of the life cycle of a facility.

    Fundamental
  • Frequency Tolerance

    the maximum allowable deviation from the nominal crystal frequency at a specified temperature, usually 25℃. The recommended frequency tolerance of the crystal over the manufacturing process is ±50 ppm.

    ±30ppm
  • Controller Type
    Nonvolatile RAM
  • Height Seated (Max)
    0.031 (0.80mm)
  • Ratings
    -
0 Similar Products Remaining
Documents & Media Download datasheets and manufacturer documentation for Analog Devices DS1312S-2.
  • Datasheets :