ams AS1753S

Mounting Type

Surface Mount

Package / Case

14-TSSOP (0.173, 4.40mm Width)

Number of Pins

14

Turn Off Delay Time

It is the time from when Vgs drops below 90% of the gate drive voltage to when the drain current drops below 90% of the load current. It is the delay before current starts to transition in the load, and depends on Rg. Ciss.

5 ns

Operating Temperature

The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

-40°C~85°C TA

Packaging

Semiconductor package is a carrier / shell used to contain and cover one or more semiconductor components or integrated circuits. The material of the shell can be metal, plastic, glass or ceramic.

Tube

Part Status

Parts can have many statuses as they progress through the configuration, analysis, review, and approval stages.

Obsolete

Moisture Sensitivity Level (MSL)

1 (Unlimited)

Resistance

900mOhm

Max Power Dissipation

The maximum power that the MOSFET can dissipate continuously under the specified thermal conditions.

1.349W

Reach Compliance Code

unknown

Number of Circuits

4

Max Supply Voltage

In general, the absolute maximum common-mode voltage is VEE-0.3V and VCC+0.3V, but for products without a protection element at the VCC side, voltages up to the absolute maximum rated supply voltage (i.e. VEE+36V) can be supplied, regardless of supply voltage.

3.6V

Min Supply Voltage

The minimum supply voltage (V min ) is explored for sequential logic circuits by statistically simulating the impact of within-die process variations and gate-dielectric soft breakdown on data retention and hold time.

1.6V

Operating Supply Current

100nA

Nominal Supply Current

Nominal current is the same as the rated current. It is the current drawn by the motor while delivering rated mechanical output at its shaft.

100nA

Max Supply Current

100nA

Throw Configuration

SPST

Turn On Delay Time

Turn-on delay, td(on), is the time taken to charge the input capacitance of the device before drain current conduction can start.

16 ns

Supply Type

Single

On-State Resistance (Max)

900mOhm

Multiplexer/Demultiplexer Circuit

1:1

Current - Leakage (IS(off)) (Max)

2.5nA

Channel Capacitance (CS(off), CD(off))

45pF 45pF

Switch Circuit

establishes connections between links, on demand and as available, in order to establish an end-to-end circuit between devices.

SPST - NO/NC

Switch Time (Ton, Toff) (Max)

22ns, 14ns

Charge Injection

A Charge injection in analog switches and multiplexers is a level change caused by stray capacitance associated with the NMOS and PMOS transistors that make up the analog switch.

2pC

Channel-to-Channel Matching (ΔRon)

30m Ω

Voltage - Supply, Single (V+)

1.6V~3.6V

REACH SVHC

No SVHC

RoHS Status

RoHS means “Restriction of Certain Hazardous Substances” in the “Hazardous Substances Directive” in electrical and electronic equipment.

RoHS Compliant

Lead Free

Lead Free