M83513/04-E03N

Amphenol M83513/04-E03N

Part No:

M83513/04-E03N

Manufacturer:

Amphenol

Datasheet:

-

Package:

4-SOJ, 5.5mm pitch

AINNX NO:

39143983-M83513/04-E03N

Description:

Cable Assembly Wire Lead 0.457m 31POS Micro D-Sub RCP

Products specifications
  • Package / Case
    4-SOJ, 5.5mm pitch
  • Mounting Type
    Surface Mount
  • Product Status
    Active
  • Mfr
    Suntsu Electronics, Inc.
  • Package
    Bulk
  • Termination Method
    Crimp
  • Contact Materials
    Copper Alloy
  • Factory Pack QuantityFactory Pack Quantity
    1
  • Part # Aliases
    100RN31S-4E6AB
  • Manufacturer
    Amphenol
  • Brand
    Amphenol Canada
  • Series
    SXT834
  • Operating Temperature

    The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

    -10°C ~ 70°C
  • Size / Dimension
    0.315 L x 0.150 W (8.00mm x 3.80mm)
  • Type
    MHz Crystal
  • Gender
    Receptacle
  • Subcategory
    MIL-Spec / MIL-Type
  • Frequency
    24 MHz
  • Frequency Stability

    the variation of output frequency of a crystal oscillator due to external conditions like temperature variation, voltage variation, output load variation, and frequency aging.

    ±20ppm
  • ESR (Equivalent Series Resistance)
    60 Ohms
  • Load Capacitance

    the amount of capacitance measured or computed across the crystal terminals on the PCB. Frequency Tolerance. Frequency tolerance refers to the allowable deviation from nominal, in parts per million (PPM), at a specific temperature, usually +25°C.

    18pF
  • Cable Length

    A nautical unit of measure equal to one tenth of a nautical mile or approximately 1 fathoms.

    0.457 m
  • Operating Mode

    A phase of operation during the operation and maintenance stages of the life cycle of a facility.

    Fundamental
  • Frequency Tolerance

    the maximum allowable deviation from the nominal crystal frequency at a specified temperature, usually 25℃. The recommended frequency tolerance of the crystal over the manufacturing process is ±50 ppm.

    ±15ppm
  • Product Type

    a group of products which fulfill a similar need for a market segment or market as a whole.

    D-Sub MIL Spec Connectors
  • Product Category

    a particular group of related products.

    D-Sub MIL Spec Connectors
  • Height Seated (Max)
    0.098 (2.50mm)
  • Ratings
    -
0 Similar Products Remaining