FPF2108

AMI Semiconductor FPF2108

Part No:

FPF2108

Manufacturer:

AMI Semiconductor

Datasheet:

-

Package:

Radial

AINNX NO:

40848034-FPF2108

Description:

Products specifications
  • Package / Case
    Radial
  • Supplier Device Package
    -
  • Package
    Bulk
  • Mfr
    Vishay Foil Resistors (Division of Vishay Precision Group)
  • Product Status
    Active
  • Lead Free Status / RoHS Status
    Lead free / RoHS Compliant
  • Other Names
    FPF2108-ND FPF2108TR
  • Operating Temperature

    The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

    -65°C ~ 175°C
  • Series
    MA
  • Packaging

    Semiconductor package is a carrier / shell used to contain and cover one or more semiconductor components or integrated circuits. The material of the shell can be metal, plastic, glass or ceramic.

    Tape & Reel (TR)
  • Size / Dimension
    0.311 L x 0.110 W (7.90mm x 2.80mm)
  • Tolerance
    ±0.1%
  • Moisture Sensitivity Level (MSL)
    1 (Unlimited)
  • Number of Terminations
    2
  • Temperature Coefficient

    The resistance-change factor per degree Celsius of temperature change is called the temperature coefficient of resistance. This factor is represented by the Greek lower-case letter “alpha” (α). A positive coefficient for a material means that its resistance increases with an increase in temperature.

    ±2.5ppm/°C
  • Resistance
    2.2725 kOhms
  • Composition
    Metal Foil
  • Power (Watts)
    0.3W
  • Base Part Number
    FPF2108
  • Number of Outputs
    1
  • Output Type
    P-Channel
  • Failure Rate

    the frequency with which an engineered system or component fails, expressed in failures per unit of time. It is usually denoted by the Greek letter λ (lambda) and is often used in reliability engineering.

    -
  • Interface
    On/Off
  • Current - Output (Max)
    400mA
  • Output Configuration
    High Side
  • Voltage - Supply (Vcc/Vdd)
    Not Required
  • Input Type
    Non-Inverting
  • Switch Type

    Based on their characteristics, there are basically three types of switches: Linear switches, tactile switches and clicky switches.

    General Purpose
  • Voltage - Load
    1.8 V ~ 5.5 V
  • Fault Protection

    Protection against electric shock under. single fault conditions.

    Current Limiting (Fixed), Over Temperature, Reverse Current, UVLO
  • Rds On (Typ)
    125 mOhm
  • Features
    -
  • Height Seated (Max)
    0.335 (8.50mm)
0 Similar Products Remaining