Altech Corporation CB16/3H

Factory Lead Time

7 Weeks

Contact Plating

Contact plating (finish) provides corrosion protection for base metals and optimizes the mechanical and electrical properties of the contact interfaces.

Zinc

Mount

Panel

Housing Material

Ceramic

Contact Materials

Steel

Series

EUROBLOCKS™

Published

2008

Part Status

Parts can have many statuses as they progress through the configuration, analysis, review, and approval stages.

Active

Moisture Sensitivity Level (MSL)

1 (Unlimited)

Connector Type

Screw

Type

Power Distribution Block

Number of Positions

6

Max Operating Temperature

The Maximum Operating Temperature is the maximum body temperature at which the thermistor is designed to operate for extended periods of time with acceptable stability of its electrical characteristics.

600°C

Min Operating Temperature

-40°C

Color

White

Voltage - Rated DC

300V

Orientation

Right Angle

Current Rating

Current rating is the maximum current that a fuse will carry for an indefinite period without too much deterioration of the fuse element.

76A

Approval Agency

cULus

Number of Contacts

3

Max Current Rating

65A

Wire Gauge (Max)

6 AWG

Wire Gauge (Min)

20 AWG

Load Side Connection Type

Applied when there are no circuit breaker slots available. The wires are connected directly to the existing wires, between the electrical panel and (on the load side of) the main breaker. Some utilities do not allow this connection or do so only if it is approved by a professional electrician.

Screw Connection

Line Side Connection Type

This method requires that the wires from the inverter are connected to the service wires on the line side of the circuit breaker. This connection is very rarely allowed for residential systems but is increasingly common in commercial systems. Utilities usually require that the design for this connection and the installation are approved by a professional electrician.

Screw Connection

Line Side Wire/Stud Size

6-18 AWG

Line Side Connections Per Pole

1

Load Side Wire/Stud Size

6-18 AWG

Height

23.2mm

Length

48mm

Width

27.5mm

RoHS Status

RoHS means “Restriction of Certain Hazardous Substances” in the “Hazardous Substances Directive” in electrical and electronic equipment.

ROHS3 Compliant