Altech 56.OW69.1111N

Mounting Type

Surface Mount

Package / Case

16-TSSOP (0.173, 4.40mm Width) Exposed Pad

Supplier Device Package

16-TSSOP-EP

Package

Tube

Base Product Number

MAX5069

Mfr

Analog Devices Inc./Maxim Integrated

Product Status

Obsolete

RoHS

Compliant

Factory Pack QuantityFactory Pack Quantity

10

Manufacturer

Altech

Brand

Altech

Operating Temperature

The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

-40°C ~ 125°C (TJ)

Series

-

Subcategory

Relays

Function

Step-Down

Number of Outputs

1

Output Type

Transistor Driver

Output Configuration

Positive, Isolation Capable

Voltage - Supply (Vcc/Vdd)

10.8V ~ 24V

Control Features

Dead Time Control, Enable, Frequency Control

Topology

Buck

Frequency - Switching

50kHz ~ 2.5MHz

Synchronous Rectifier

Synchronous rectification is a technique for improving the efficiency of rectification by replacing diodes with actively controlled switches, usually power MOSFETs or power bipolar junction transistors (BJT).

No

Product Type

a group of products which fulfill a similar need for a market segment or market as a whole.

Safety Relays

Coil Voltage

110 VDC

Duty Cycle (Max)

100%

Serial Interfaces

A serial interface is a communication interface between two digital systems that transmits data as a series of voltage pulses down a wire. Essentially, the serial interface encodes the bits of a binary number by their "temporal" location on a wire rather than their "spatial" location within a set of wires.

-

Clock Sync

Clock synchronization is a topic in computer science and engineering that aims to coordinate otherwise independent clocks. Even when initially set accurately, real clocks will differ after some amount of time due to clock drift, caused by clocks counting time at slightly different rates.

Yes

Output Phases

1

Product Category

a particular group of related products.

Safety Relays

IP Rating

IP (or "Ingress Protection") ratings are defined in international standard EN 6529 (British BS EN 6529:1992, European IEC 659:1989). They are?used to define levels of sealing effectiveness of electrical enclosures against intrusion from foreign bodies?(tools, dirt etc) and moisture.

IP67