EC11E15244C0

ALPS ALPINE EC11E15244C0

Part No:

EC11E15244C0

Manufacturer:

ALPS ALPINE

Datasheet:

-

Package:

-

AINNX NO:

36565719-EC11E15244C0

Category:

Encoders

Description:

Encoders With 0.5 Switch 15Pulse 30Detent

Products specifications
  • Mount
    Through Hole
  • Mounting Type
    Through Hole
  • Housing Material
    Aluminum
  • Mounting Hole Diameter
    1 mm, 2.6 x 1.5 mm
  • Number of Outlets
    (1) 120V Receptacle
  • Manufacturer Part Number
    P-A5A8-M3R0-C7
  • Manufacturer
    Grace Technologies
  • RoHS
    Compliant
  • Encoder Signal
    Digital Square Wave
  • Encoder Reading
    Incremental
  • Shaft Style
    Flat
  • Shaft Type
    D Type Flatted End
  • Package Description
    ROHS COMPLIANT, COMPACT PACKAGE-5
  • Operating Temperature-Min
    -30 °C
  • Operating Temperature-Max
    85 °C
  • Rohs Code
    Yes
  • Part Life Cycle Code
    Transferred
  • Samacsys Description
    Encoder, LP, 11mm, 15 pulse, switched Alps 15 Pulse Incremental Mechanical Rotary Encoder with a 6 mm Flat Shaft, Through Hole
  • Ihs Manufacturer
    ALPS ELECTRIC CO LTD
  • Risk Rank
    5.76
  • Termination
    Solder Pin
  • Orientation
    Vertical
  • Number of Functions
    1
  • Reach Compliance Code
    unknown
  • Configuration
    SINGLE, 2 CHANNELS
  • Number of Channels
    2
  • Max Supply Voltage

    In general, the absolute maximum common-mode voltage is VEE-0.3V and VCC+0.3V, but for products without a protection element at the VCC side, voltages up to the absolute maximum rated supply voltage (i.e. VEE+36V) can be supplied, regardless of supply voltage.

    5 V
  • Optoelectronic Device Type
    ROTARY POSITION ENCODER
  • Hole Diameter
    1.5 mm
  • Encoder Type

    An encoder is classified into four types: mechanical, optical, magnetic, and electromagnetic induction types.

    Incremental
  • Pulses per Revolution

    Pulses per revolution (or PPR) is a parameter associated with encoders. Basically, it is a measure of the number of pulses per full revolution or turn of the encoder, with a full revolution being 360 degrees. In essence, it is a measure of an encoder's resolution.

    15
  • Shaft Diameter
    6 mm
  • IP Rating

    IP (or "Ingress Protection") ratings are defined in international standard EN 6529 (British BS EN 6529:1992, European IEC 659:1989). They are?used to define levels of sealing effectiveness of electrical enclosures against intrusion from foreign bodies?(tools, dirt etc) and moisture.

    IP65
  • Width
    12 mm
  • REACH SVHC
    Unknown
0 Similar Products Remaining