Allen Bradley 440N-G02117

Package / Case

Axial

Supplier Device Package

Axial

Housing Material

Stainless Steel

Range

Ferrogard

Operating Temperature

The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

-55°C ~ 200°C

Series

RSF

Packaging

Semiconductor package is a carrier / shell used to contain and cover one or more semiconductor components or integrated circuits. The material of the shell can be metal, plastic, glass or ceramic.

Tape & Reel (TR)

Size / Dimension

0.126 Dia x 0.354 L (3.20mm x 9.00mm)

Tolerance

±5%

Part Status

Parts can have many statuses as they progress through the configuration, analysis, review, and approval stages.

Active

Number of Terminations

2

Temperature Coefficient

The resistance-change factor per degree Celsius of temperature change is called the temperature coefficient of resistance. This factor is represented by the Greek lower-case letter “alpha” (α). A positive coefficient for a material means that its resistance increases with an increase in temperature.

±200ppm/°C

Resistance

22 Ohms

Composition

Metal Oxide Film

Power (Watts)

0.5W, 1/2W

Supply Voltage

250V ac

Depth

16mm

Actuator Type

Magnetic

Failure Rate

the frequency with which an engineered system or component fails, expressed in failures per unit of time. It is usually denoted by the Greek letter λ (lambda) and is often used in reliability engineering.

--

Connection Type

3m Cable

Features

Flame Retardant Coating, Safety

Safety Category

1

Supply Current

Supply current refers to the input current to an LDO regulator at no load, which flows inside the IC in order to operate. The power consumption of an LDO regulator can be calculated as. (Input Voltage) x (Consumption current of IC itself) + (Input Voltage - Output Voltage) x (Load current)

2000mA

Auxiliary Contacts

NO

IP Rating

IP (or "Ingress Protection") ratings are defined in international standard EN 6529 (British BS EN 6529:1992, European IEC 659:1989). They are?used to define levels of sealing effectiveness of electrical enclosures against intrusion from foreign bodies?(tools, dirt etc) and moisture.

IP68

Height Seated (Max)

--

Width

33.5mm

Length

78.5mm