C3E-25.000-18-3030-X-R

Aker Technology C3E-25.000-18-3030-X-R

Part No:

C3E-25.000-18-3030-X-R

Manufacturer:

Aker Technology

Datasheet:

-

Package:

4-SMD, No Lead

AINNX NO:

35460042-C3E-25.000-18-3030-X-R

Category:

Crystals

Description:

Crystal 25MHz ±30ppm (Tol) ±30ppm (Stability) 18pF FUND 40Ohm 4-Pin SMD T/R

Products specifications
  • Mounting Type
    Surface Mount
  • Package / Case
    4-SMD, No Lead
  • Package
    Tape & Reel (TR)
  • Mfr
    Aker Technology USA
  • Product Status
    Active
  • Operating Temperature

    The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

    -20°C ~ 70°C
  • Series
    SiT8208
  • Packaging

    Semiconductor package is a carrier / shell used to contain and cover one or more semiconductor components or integrated circuits. The material of the shell can be metal, plastic, glass or ceramic.

    Tape & Reel (TR)
  • Size / Dimension
    0.197 L x 0.126 W (5.00mm x 3.20mm)
  • Part Status

    Parts can have many statuses as they progress through the configuration, analysis, review, and approval stages.

    Active
  • Type
    XO (Standard)
  • Voltage - Supply
    3.3V
  • Frequency
    12MHz
  • Frequency Stability

    the variation of output frequency of a crystal oscillator due to external conditions like temperature variation, voltage variation, output load variation, and frequency aging.

    ±10ppm
  • Output
    LVCMOS, LVTTL
  • Function
    Enable/Disable
  • Base Resonator
    MEMS
  • Current - Supply (Max)
    33mA
  • ESR (Equivalent Series Resistance)
    100 Ohms
  • Current - Supply (Disable) (Max)
    31mA
  • Load Capacitance

    the amount of capacitance measured or computed across the crystal terminals on the PCB. Frequency Tolerance. Frequency tolerance refers to the allowable deviation from nominal, in parts per million (PPM), at a specific temperature, usually +25°C.

    18pF
  • Operating Mode

    A phase of operation during the operation and maintenance stages of the life cycle of a facility.

    Fundamental
  • Frequency Tolerance

    the maximum allowable deviation from the nominal crystal frequency at a specified temperature, usually 25℃. The recommended frequency tolerance of the crystal over the manufacturing process is ±50 ppm.

    ±30ppm
  • Absolute Pull Range (APR)
    --
  • Height Seated (Max)
    0.032 (0.80mm)
  • Ratings
    --
0 Similar Products Remaining