Advanced Linear Devices Inc. ALD4213SCL

Factory Lead Time

8 Weeks

Mounting Type

Surface Mount

Package / Case

16-SOIC (0.154, 3.90mm Width)

Surface Mount

having leads that are designed to be soldered on the side of a circuit board that the body of the component is mounted on.

YES

Number of Pins

16

Turn Off Delay Time

It is the time from when Vgs drops below 90% of the gate drive voltage to when the drain current drops below 90% of the load current. It is the delay before current starts to transition in the load, and depends on Rg. Ciss.

150 ns

Operating Temperature

The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

-40°C~85°C TA

Packaging

Semiconductor package is a carrier / shell used to contain and cover one or more semiconductor components or integrated circuits. The material of the shell can be metal, plastic, glass or ceramic.

Tube

Published

2016

JESD-609 Code

e3

Pbfree Code

yes

Part Status

Parts can have many statuses as they progress through the configuration, analysis, review, and approval stages.

Active

Moisture Sensitivity Level (MSL)

1 (Unlimited)

Number of Terminations

16

Resistance

135Ohm

Terminal Finish

Matte Tin (Sn)

Max Power Dissipation

The maximum power that the MOSFET can dissipate continuously under the specified thermal conditions.

600mW

Terminal Position

DUAL

Terminal Form

Occurring at or forming the end of a series, succession, or the like; closing; concluding.

GULL WING

Peak Reflow Temperature (Cel)

NOT SPECIFIED

Number of Functions

4

Supply Voltage

5V

Reach Compliance Code

unknown

Time@Peak Reflow Temperature-Max (s)

NOT SPECIFIED

Number of Channels

1

Number of Circuits

4

Max Supply Voltage

In general, the absolute maximum common-mode voltage is VEE-0.3V and VCC+0.3V, but for products without a protection element at the VCC side, voltages up to the absolute maximum rated supply voltage (i.e. VEE+36V) can be supplied, regardless of supply voltage.

12V

Min Supply Voltage

The minimum supply voltage (V min ) is explored for sequential logic circuits by statistically simulating the impact of within-die process variations and gate-dielectric soft breakdown on data retention and hold time.

3V

Nominal Supply Current

Nominal current is the same as the rated current. It is the current drawn by the motor while delivering rated mechanical output at its shaft.

10nA

Max Supply Current

1μA

Turn On Delay Time

Turn-on delay, td(on), is the time taken to charge the input capacitance of the device before drain current conduction can start.

300 ns

Voltage - Supply, Single/Dual (±)

3V~12V ±1.5V~6V

Neg Supply Voltage-Nom (Vsup)

-5V

Max Dual Supply Voltage

A Dual power supply is a regular direct current power supply. It can provide a positive as well as negative voltage. It ensures stable power supply to the device as well as it helps to prevent system damage.

6V

On-State Resistance (Max)

135Ohm

Multiplexer/Demultiplexer Circuit

1:1

Off-state Isolation-Nom

75 dB

Current - Leakage (IS(off)) (Max)

100pA

Channel Capacitance (CS(off), CD(off))

3pF 3pF

On-state Resistance Match-Nom

16Ohm

Switch Circuit

establishes connections between links, on demand and as available, in order to establish an end-to-end circuit between devices.

SPST - NO/NC

Switch Time (Ton, Toff) (Max)

130ns, 130ns

Charge Injection

A Charge injection in analog switches and multiplexers is a level change caused by stray capacitance associated with the NMOS and PMOS transistors that make up the analog switch.

0.2pC

Channel-to-Channel Matching (ΔRon)

2.7 Ω

Switch-on Time-Max

130ns

Switch-off Time-Max

130ns

RoHS Status

RoHS means “Restriction of Certain Hazardous Substances” in the “Hazardous Substances Directive” in electrical and electronic equipment.

ROHS3 Compliant