Adam Tech CG-P-M10-1.5

Mounting Type

Surface Mount

Package / Case

4-SMD, No Lead

Material

Polyamide (PA66), Nylon 6/6

Package

Bulk

Mfr

Suntsu Electronics, Inc.

Product Status

Active

Base Product Number

-

Operating Temperature

The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

-10°C ~ 60°C

Series

SXT224

Size / Dimension

0.098 L x 0.079 W (2.50mm x 2.00mm)

Type

MHz Crystal

Color

-

Ingress Protection

Ingress Protection rating (or just IP rating), is an international standard (IEC 60529) used to rate the degree of protection or sealing effectiveness in electrical enclosures against intrusion of objects, water, dust or accidental contact. It corresponds to the European standard EN 60529.

IP68 - Dust Tight, Waterproof

Frequency

19.2 MHz

Frequency Stability

the variation of output frequency of a crystal oscillator due to external conditions like temperature variation, voltage variation, output load variation, and frequency aging.

±30ppm

ESR (Equivalent Series Resistance)

100 Ohms

Load Capacitance

the amount of capacitance measured or computed across the crystal terminals on the PCB. Frequency Tolerance. Frequency tolerance refers to the allowable deviation from nominal, in parts per million (PPM), at a specific temperature, usually +25°C.

20pF

Operating Mode

A phase of operation during the operation and maintenance stages of the life cycle of a facility.

Fundamental

Frequency Tolerance

the maximum allowable deviation from the nominal crystal frequency at a specified temperature, usually 25℃. The recommended frequency tolerance of the crystal over the manufacturing process is ±50 ppm.

±20ppm

Thread Size

given in nominal sizes, not in the actual measurement.

M10

Includes

Locknut, Seal

Panel Hole Size

0.406 (10.3mm)

Conduit Hub Size

-

Height Seated (Max)

0.026 (0.65mm)

Ratings

-