Adafruit Industries LLC 324

Factory Lead Time

2 Weeks

Package / Case

200

Weight

0.441lb 200.03g

Mounting Hole Spacing

The holes in the mounting brackets are spaced at 1 U (1.75 in. or 4.45 cm), so the router can be mounted in any rack that provides holes spaced at that distance.

1.220 (30.99mm)

CoilResistance

35Ohms

Voltage Rated

RATED voltage is the voltage on the nameplate - the "design point" for maximum power throughput and safe thermal operation.

12VDC

Operating Temperature

The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

0°C~50°C

Size / Dimension

Square - 1.654 x 1.654 42.00mmx42.00mm

Part Status

Parts can have many statuses as they progress through the configuration, analysis, review, and approval stages.

Active

Moisture Sensitivity Level (MSL)

1 (Unlimited)

Termination

Wire Leads

Type

Hybrid

Max Operating Temperature

The Maximum Operating Temperature is the maximum body temperature at which the thermistor is designed to operate for extended periods of time with acceptable stability of its electrical characteristics.

50°C

Min Operating Temperature

0°C

Composition

Hybrid

Current Rating (Amps)

350mA

Current Rating

Current rating is the maximum current that a fuse will carry for an indefinite period without too much deterioration of the fuse element.

350mA

Termination Style

Wire Leads

Approval Agency

UL

Coil Type

There are 2 different types of 'coil'; one has copper on it (IUD) and the other contains hormone (Mirena IUS). Both are over 99% effective at protecting against pregnancy.

Bipolar

Step Angle

the angle at which the rotor of a stepper motor moves when one pulse is applied to the input of the stator.

1.8°

Steps per Revolution

200

Torque - Holding (oz-in / mNm)

28 / 197

Features

Flatted Shaft

NEMA Frame Size

NEMA (National Electrical Manufacturers Association) frame size refers to mounting only and has no direct bearing on the motor body diameter. In any standard frame number designation there are either two or three numbers.

17

Rotor Inertia

38gcm2

Height

25.4mm

Length

63.5mm

Width

38.1mm

Diameter - Shaft

0.197 (5.00mm)

Length - Shaft and Bearing

0.945 24.00mm