3M 3353/50

Package / Case

1206 (3216 Metric), Convex, Long Side Terminals

Mounting Type

Surface Mount

Number of Pins

8

Supplier Device Package

0612

Conductor Material

A conductor is a material which contains movable electric charges. In metallic conductors, such as copper or aluminum, the movable charged particles are electrons, though in other cases they can be ions or other positively charged species.

Tinned Copper

Maximum Voltage Rating

300 V

Packaging

Semiconductor package is a carrier / shell used to contain and cover one or more semiconductor components or integrated circuits. The material of the shell can be metal, plastic, glass or ceramic.

Cut Tape (CT)

Series

ACA - Professional

Operating Temperature

The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

-55°C ~ 125°C

Size / Dimension

0.126 L x 0.059 W (3.20mm x 1.50mm)

Tolerance

±0.5%

Part Status

Parts can have many statuses as they progress through the configuration, analysis, review, and approval stages.

Discontinued at Digi-Key

Temperature Coefficient

The resistance-change factor per degree Celsius of temperature change is called the temperature coefficient of resistance. This factor is represented by the Greek lower-case letter “alpha” (α). A positive coefficient for a material means that its resistance increases with an increase in temperature.

±50ppm/°C

Type

Flat Cable

Color

Gray

Applications

Voltage Divider (TCR Matched)

Cable Length

A nautical unit of measure equal to one tenth of a nautical mile or approximately 1 fathoms.

30.48 m

Number of Resistors

4

Circuit Type

There are 5 Main Types of Electric Circuit – Close Circuit, Open Circuit, Short Circuit, Series Circuit and Parallel Circuit.

Isolated

Power Per Element

100mW

Resistor-Ratio-Drift

--

Cable Pitch

1.27 mm

Resistance (Ohms)

1k, 3k

Resistor Matching Ratio

The resistor matching is done for better resistor poly arrangement and spacing(it is process dependent ),but the sheilding is used to protect critical nets from crossing noisy signals.

--

Height Seated (Max)

0.022 (0.55mm)